 |
|
|
|
|
Frequently Asked Questions |
Q) Where and how can Landmark Metal Coating products be installed?
Landmark Metal Coating products may be used for interior and exterior applications. All tiles can be easily cut and mitered using a wet or dry saw. The metal will not chip, flake or peel from any cutting or drilling. Field tile or tile with low relief may also be used for floor application. Tile may be used in a shower or pool area, around a cook-top, behind a backsplash and range hood and around fireplaces. For installation we recommend a high quality interior/exterior multi-purpose thin-set mortar. All types of grout may be used but care must be used for epoxy grout ? no acidic clean up. Apply a two-part epoxy if using tile as an onlay over existing stone or ceramic tile. Tile may also be glued to metal or wood hood ranges and wood cabinets using a mastic or wood bond. Run a clear bead of silicone around outside to keep moisture out. Refer to the Tile Installation sheet that you will receive with your purchase.
|
 |
Q) How long does it take to receive my tile products?
Some of the tiles are in stock that you can purchase and receive at the same date of confirmed order. Other field tiles will be a week to 10 days. Custom made tile orders will be much longer than the regular tile orders since they will be custom and perhaps entirely handmade to meet your exact specifications. All custom tile and mosaic orders are usually 4-6 weeks from the date of confirmed order. Sinks & Faucets other than the ones we have in our stock are usually 4 days from the date of confirmed order. You have to check it with our staff before you go ahead and purchase.
|
|
|
|
|
